LiveChat

Follow us

This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Learn morex
SHARE A PHOTO OF YOUR DECKING/CLADDING TO
WIN £250!
SEE BLOG FOR DETAILS
x
 

Order a sample

Receive a sample before you buy

 

Decking calculator

How much decking will I need?

 

Decking guide

How to measure your area

 

Clearance

View all products in sale

Owatrol Composite Decking Cleaner

In stock
SKU
WPCCLEANER
£42.26
Directions for use.

Before you start

Always test a small area first. Protect all areas not to be cleaned, plants, shrubs etc. including and especially aluminum parts. Always wear suitable protection – gloves (rubber/nitrile), goggles or visor, clothing.

Application of Compo-Clean composite wood cleaner:

First apply a thick layer of Compo-Clean to the area to be cleaned. Large areas, should be cleaned in smaller sections. Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination) and then scrub with a stiff nylon or synthetic brush. Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars). If required repeat the above procedure – for difficult/stubborn staining. Allow the surface to dry for 2-3 good drying days before applying a chosen finish. We would recommend Owatrol’s Compo-Care transparent tinted coating specifically for composite wood.

Clean Up Clean all tools used with water.

Things to Remember

•Shake or stir well before application. •Do not dilute. •Apply between +5°C to +35°C. Do not apply in direct sunlight or on hot wood. •Always work the entire length of a board to a logical break. •On vertical surfaces, clean from bottom to top and rinse from top to bottom to avoid streaking.

*Please note images are used for illustration purposes only, actual item may vary slightly from image supplied.

Need help? Call Us on: 01837 659901

Monday to Friday 8am to 5pm, and Saturday 8am to 12.30pm.

Why Should I consider 2.5 litre Owatrol Composite Decking Cleaner?

Maintaining your composite deck boards is made easier using the right product to clean it with. Compo-clean from Owatrol is a composite decking cleaner that does just that and works for all types of exterior composite wood, whether it be a horizontal or vertical surface. Its fast-acting solution will make brief work of maintaining your hard-worked project and can be easily applied with a brush or roller straight from the bottle.

Bottle size: 2.5 litres

Coverage: 5-10m squared per litre

The gel consistency won’t drip or run making it ideal for vertical and horizontal surfaces and can be used as a degreaser as well as a cleaner. Its water-based composite makes it environmentally friendly and means peace of mind when using near plastic pool liners, stone, cement and other materials nearby to your decking or cladding.

Whether you have fitted your decking flat side up or with the recommended grooved spacing, Owatrol composite decking cleaner gets your composite deck boards perfectly clean. All you need is a brush or roller to get started and a hose or pressure washer to rinse when you’re done.

Directions for use.

Before you start

Always test a small area first. Protect all areas not to be cleaned, plants, shrubs etc. including and especially aluminum parts. Always wear suitable protection – gloves (rubber/nitrile), goggles or visor, clothing.

Application of Compo-Clean composite wood cleaner:

First apply a thick layer of Compo-Clean to the area to be cleaned. Large areas, should be cleaned in smaller sections. Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination) and then scrub with a stiff nylon or synthetic brush. Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars). If required repeat the above procedure – for difficult/stubborn staining. Allow the surface to dry for 2-3 good drying days before applying a chosen finish. We would recommend Owatrol’s Compo-Care transparent tinted coating specifically for composite wood.

Clean Up Clean all tools used with water.

Things to Remember

•Shake or stir well before application. •Do not dilute. •Apply between +5°C to +35°C. Do not apply in direct sunlight or on hot wood. •Always work the entire length of a board to a logical break. •On vertical surfaces, clean from bottom to top and rinse from top to bottom to avoid streaking.

*Please note images are used for illustration purposes only, actual item may vary slightly from image supplied.